流体压力转换、自动化压力检测和压力控制 设备生产、销售 — 企业

注重工作细节,提高服务品质

服务热线:
13206405565
您的位置:主页 > 产品中心 > 增压系统、增压单元 气体增压系统

气体增压系统

简要描述:一、性能、特点:    菲奥特气体动力单元是利用压缩空气作为动力驱动气驱增压泵进行工作,可对空气、氧气、氮气、氩气、氦气等进行增压,该装置是一个独立的增压单元,串联在被增压管路中。具有增压速度快,使用寿命长,压力稳定,操作简单,维护方便,使用等特点。Performance and characteristics:FAT

  • 更新时间:2021-11-17 10:45:10
  • 访  问  量:554
详细介绍


一、性能、特点:
    菲奥特气体动力单元是利用压缩空气作为动力驱动气驱增压泵进行工作,可对空气、氧气、氮气、氩气、氦气等进行增压,该装置是一个独立的增压单元,串联在被增压管路中。具有增压速度快,使用寿命长,压力稳定,操作简单,维护方便,使用等特点。

Performance and characteristics:

FAT gas power unit uses compressed air as power to drive the gas driven booster pump to work, which can pressurize air, oxygen, nitrogen, argon, helium, etc. the device is an independent booster unit, which is connected in series in the pressurized pipeline. It has the characteristics of fast pressurization speed, long service life, stable pressure, simple operation, convenient maintenance and safe use.



二、应用范围:

菲奥特气体动力单元特别适用于各种需要气源压力调整场合,压缩空气末端局部升压、阀门及井口装置、水中冒泡试验、气压调节器或气体气密性检测等

Application scope:

Fiot gas power unit is especially suitable for various occasions requiring air source pressure adjustment, local pressure rise at the end of compressed air, valves and wellhead devices, water bubble test, air pressure regulator or gas tightness test, etc

三、气体动力单元的优点:
1
、可用于不同的气体增压
    对于氮气、氧气、氩气、氦气、二氧化碳气等,该机器将分别采用不同的增压器和特殊的管路,增压与驱动腔隔离可防止被增压气体和压缩空气混合,避免被增压气体遭受污染。
2、压力稳定、脉冲小
    与传统气体增压器相比,该气体动力单元产生的脉冲小,有稳定的压力输出,且输出压力值可通过附加的减压阀调节至工作场合所允许的压力范围内。
3、噪声低、投入成本低、节约能源
    与高压空压机系统和高压压缩机比较,该机噪声低、投入成本低,当达到所设定压力时,无额外能量消耗,所以其耗能量小,节约能源。
4、便于安装、使用
    气体动力单元为全气动控制,连接上驱动气入口,被增压气体入口,增压后的气体出口即可工作;调节驱动气源压力即可无级调整被增压气体的压力。

    Advantages of gas power unit:

 1.It can be used for different gas pressurization

   For nitrogen, oxygen, argon, helium, carbon dioxide, etc., the machine will adopt different superchargers and special pipelines respectively. The pressurization and drive chamber are isolated to prevent the pressurized gas from mixing with compressed air and avoid the pollution of the pressurized gas.

2.Stable pressure and small pulse

   Compared with the traditional gas supercharger, the pulse generated by the gas power unit is small, has a stable pressure output, and the output pressure value can be adjusted to the allowable pressure range in the workplace through an additional pressure reducing valve.

3.Low noise, low investment cost and energy saving

  Compared with high-pressure air compressor system and high-pressure compressor, the machine has low noise and low input cost. When the set pressure is reached, there is no additional energy consumption, so it consumes less energy and saves energy.

4.Easy to install and use

  The gas power unit is fully pneumatically controlled, connected with the driving gas inlet, the pressurized gas inlet, and the pressurized gas outlet can work; The pressure of the pressurized gas can be adjusted steplessly by adjusting the pressure of the driving air source.

 

留言框

  • 产品:

  • 您的姓名:

  • 联系电话:

上一篇:气驱液体增压单元

下一篇:空气增压泵

联系方式 二维码

服务热线

13206405565

扫一扫,关注我们